<I> Performance index (Note: Actual measured values of
National Research Center of Testing Techniques for Building
Materials)
1 | Apparent density t/_ | 1.18 |
2 | Water absorbing capacity | 22.4 |
3 | Anti-fracture Mpa | 22.0 |
4 | Resistance to tension Mpa | 6.4 |
5 | Impact resistance KJ/M2 | 10.1 |
<II> Features
This product can be used repeatedly with such following features:
waterproof, anti-breaking, anti-impact, even & glazed surface, easy
operation and low cost, and it can be nailed, sawed, planed and
stuck. It can replace steel mould board, 5 ply panel, 9 ply panel
and bamboo & wood mould board, and be applied in all kinds of
casting concrete engineering.
If you have any questions,please feel free to contact us,best
service is always there for you.
The machine has three functions, it can automatically finish
glue-spreading, overlaying and drying.
It transfer the board with chain and chain wheel, you can see it
has compact structure and easy operation.
It was used to overlay wood-grain paper and color paper NC film for
composite fire-resistant board, and
it can provide advanced processing to many kinds of wooden board
(such as three-ply board, five-ply
board, chipboard and particle board ). At the same time, it can
manufacture various luxurious decorating
board with times profit, and these boards are more suitable for
Furniture Factory, Artificial Board Factory,
Rural-Town Enterprise and Individual Enterprise to manufacture.
D, E Model Overlaying Production Line (PVC) is suitable for
Large-scale Overlay Professional Factory. III Production process:
The hatschek process is the most advanced technology in fiber
cement tile production line with full automatic. We can custom-made
according to requirements.
Photos of main equipment
IV Product advantage:
Four station fiber cement (tile and board) machine
Production Introduction
This equipment is reached and development with rich experience and
advanced technology, used for producing asbestos tile, calcium
silicate board fiber cement board.
This machine is used PLC automatic system, pneumatic principle with
less operators and simple maintenance. One shift just needed 7
workers.
The control system is included Mitsubishi System controller
SX2N-64MB,PANASONIC INVERTER VF-8Z,VFO and so on.
This system is included automatic, debugging, manual function. One
mold three tiles, one mold two tiles or one mold one tiles and
ridge tile can be chosen.
Parameter as follows:
